3.5” TOP ENTRY CPU EQUALIZER WITH COIN REJECT LEVER.

CH-268T  TOP ENTRY ELECTROIC COIN SELECTOR .

Drop Inserting Type.

□    Capable of accepting all size of coins ﹠tokens.

□    Select coin by Diameter, Thickness ﹠Metal Content.

□    CPU anti-string programs presetting against fraud .

□    3 ways switch of coin triggering time duration.

□    Adjustable VR tunning for sensitivity of coin acceptance.

□    Inhibit Line enable accept command from Host Machine.

□    Allow to connect to Counter(Meter).

□    Optional DC+24V ﹠AC Power upon buyer request.

CPU EQUALIZER + COIN REJECT LEVER

○    CPU anti-string programs by lock operation against fraud .

○    Prevent host machine from Slugs 、 Wire-stringing ﹠ Tricks.

○    Coin drop speed ﹠ timing preset in 『S』shape sliding passage CPU lock against unusual move、abnormal stay ﹠reverse draw 500ms ~ 5 seconds lock out along with operation auto-recovery.

○    Compatible with wide variety of Cabinet, Door ﹠Frame.

○    Coin diameter double check in slot opening ﹠lid entrance by diameter-rail ﹠sampling clamp for preventing bigger invalid coin from inserting .

○    Spring lid-wiring fully sweep sluggish coins off passage by reject lever for free from coin jam.

○    More than millions times strong stroke durability of solenoid for the best performance of coin selecting .

        Voltage : DC+12V

        Coin Diameter : 18mm~33mm

        Coin thickness : 1.2mm~3.3mm

USER GUIDE:

1.      Replace yellow plastic token to the correct coin as wish to accept in sampling clamp.

2.      Adjust diameter-rail of lid for preventing bigger invalid coins from inserting.

3.      Drive screw of lid-wing if coin thickness more than 2.5mm.

4.      Connect loom to host machine as following lines guide :

White line—(N.C. signal)

Green line—(N.O. signal)

Gray line—Counter (Meter)

Yellow line—inhibit/low(<+1V)

Red line—Power DC +12V

Black Line—Ground (GND)

5.      Switch Time Duration for correct triggering of coin acceptance if necessary .

Long duration of Pulse   :. 100ms

Common duration of Pulse : 50ms

Short duration of Pulse    :20ms

6.      VR tunning for sensitivity of coin acceptance.

Turn clockwiste (+) for slack acceptance.

Turn anti-clockwise(-) for tight acceptance.